www.lineman.co.nz • View topic - E.P.V Lineman.co.nz
 
 

CapitalSafety

ESITO


Safework

Marble Recruitment

Top Energy



E.P.V

Anything to do with Overhead work, Including G&B

E.P.V

Postby frankhas3 » Wed May 02, 2007 8:52 pm

We are looking to up dating our EPV and was wondering if anyone knew of any web site's within NZ I could check out.
frankhas3
 
Posts: 5
Joined: Thu Sep 07, 2006 10:02 pm
Location: NZ

Postby otdrmn » Fri May 04, 2007 7:27 pm

Dont think there is an NZ manufacturer of EPV's try Redman Gary in Aussie.
Good luck

G
User avatar
otdrmn
 
Posts: 265
Joined: Sun Jul 09, 2006 1:35 pm
Location: South Head, Helensville

Postby frankhas3 » Sun May 06, 2007 10:58 pm

Thanks G, I found a web site from a company that sells secondhand Aichi epv's in Wellington. Think we brought our original from there as I think alot of other companies have done the same. :idea:
frankhas3
 
Posts: 5
Joined: Thu Sep 07, 2006 10:02 pm
Location: NZ

Epvs

Postby pbag » Thu May 10, 2007 8:43 pm

Our company is trying to do away with Aitchi's and weve just bought a new EPV from an outfit in Nelson, Marlborough Lines have one and they think its great, ours due to arrive in a month or so, Fits on the deck of around a 12 tonne truck, apparently one joystick controls all movements.
pbag
 
Posts: 3
Joined: Tue May 08, 2007 8:14 pm

Postby deebee » Thu May 10, 2007 10:20 pm

So why are they tring to do away with Aichis?
Just wondering.. personally I think they're not that great and was wondering how NZ came up with accepting these machines with only one insulated boom insert as these would'nt be acceptable in Europe or Nth America?
deebee
 
Posts: 23
Joined: Sun Jul 30, 2006 5:54 pm
Location: Warkworth

Postby pbag » Fri May 11, 2007 8:24 pm

I dont know about the other guys around the country, but we have had a few problems with the computers inside them acting up, and we are also looking for something with a bit longer reach, dont quote me but I believe Aichi only goto roughly 14metres, this new EPV we getting reaches 17metres
pbag
 
Posts: 3
Joined: Tue May 08, 2007 8:14 pm


Return to Overhead Linework

Who is online

Users browsing this forum: No registered users and 2 guests


TransNet

TEX Onsite

MITA Consulting

Electrix

Northpower

Electropar
>